How To Enter Programming Mode - NEC SL1100 Networking Manual

Issue 6.0
Telephone Programming Instructions shows how to enter the program data into
system memory. For example:
To enter the programming mode:
1.
H
S 2
OW TO
ECTION
To enter programming mode:
1.
2.
3.
4.
5 - 2
15-07-01
15-07-01 TEL
KY01 = *01

Dial 150701 from the telephone dial pad. See the message 15-07-01 TEL on
the first line of the telephone display. This indicates the program number (15-07),
item number (01), and that the options are being set for the extension.
The second row of the display KY01 = *01 indicates that Key 01 is being
programmed with the entry of *01. The third row allows you to move the cursor to
the left or right, depending on which arrow is pressed.
To learn how to enter the programming mode, refer to
Programming Mode below.
E P
NTER ROGRAMMING
Go to any working display telephone.
In a newly installed system, use extension (port 1).

Do not lift the handset.
Press Speaker.
.
# #
 
Password
M
ODE
NEC SL1100
Section 2 How to Enter
Programming