Figure 9-20 Type Of Service Window - NEC SL1100 Networking Manual

Issue 6.0
9 - 38
Enter Values on a Per Phone Basis
By the web browser

By configuration mode through the dial pad

To enter the values per phone, browse to the individual phone or enter the
configuration mode through dial pad.
The following example describes assigning these fields via the web browser.
1. Log in on PC. Refer to Section
9-24.
2. Go to Network Settings>Advanced Settings>Type Of Service.

Figure 9-20 Type of Service Window

13.5.1 Logging In on the PC on page
IP Multiline Station (SIP)
NEC SL1100