Sip Server Information Setup - NEC SL1100 Networking Manual

Hide thumbs Also See for SL1100:
Table of Contents

Advertisement

Issue 6.0
Program/Item
No.
84-14-09
SIP Trunk Basic Information
Setup – Called Party
Information
6.9
Program/Item
No.
10-29-01
SIP Server Information
Setup – Default Proxy
(Outbound)
10-29-02
SIP Server Information
Setup – Default Proxy
(Inbound)
7 - 26
Description/
Selection
0 = Request URI
1 = To Header
Default is 0

SIP Server Information Setup

Description/
Selection
0 = Off
1 = On
Default is 0
0 = Off
1 = On
Default is 0
Assigned Data
Version 5.0 or higher: Select SIP
Profile 1-2.
Assigned Data
Version 5.0 or higher: Select SIP
Profile 1-2.
Version 5.0 or higher: Select SIP
Profile 1-2.
NEC SL1100
Comments
Set the Called Party
Information.
Comments
Define the SIP Proxy setup,
Default Proxy (Outbound).
When SIP trunking is used, this
must be on.
If entries are made in Program
10-29-xx for a SIP Server and
the SIP Server is then removed
or not used, the entries in
Program 10-29-xx must be set
back to their default settings.
Even if 10-29-01 is set to 0, the
NEC SL1100 still checks the
settings in the remaining 10-29
programs.
Define the Default Proxy
(inbound).
SIP Trunking

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents