NEC SL1100 Networking Manual page 202

Issue 6.0
9 - 68
At this point, you are prompted with a User Name and

Password. These are the defaults:
User Name: ADMIN
Password: 6633222
 The user name should already be entered in the terminal.
Press
Set

After you enter the password, press

Network Settings
DHCP Mode - DHCP Disable. Click

IP Address - Enter the IP Address for the station, and click

.
OK
Default Gateway - Enter the Default Gateway Address, and

click . If you are testing without a router/gateway, this
OK
must be left at the default 0.0.0.0
Subnet Mask - Enter the Subnet Mask for the station, and

click .
OK
SIP Settings
Do not enter any information in the SIP user field. When

the phone boots up, it requires a user name and password.
These are preassigned in the system. When entered
correctly, the phone is provided an extension number.
Server Address & URI - 1

Enter the IP address assigned in command 10-12-09, and
click .
OK
SIP Server Port - 1

Enter port 5080, and click
Press the

Press the

to memory, reboots itself and registers with the CPU.
soft key to step down to the password field.
st
Server Address
st
Server Port
.
OK
key until you are back at the Main menu.
EXIT
key, and the phone saves the configuration
SAVE
NEC SL1100
soft key.
OK
.
OK
IP Multiline Station (SIP)