Ip Phone Relocation - NEC SL1100 Networking Manual

NEC SL1100

13.11 IP Phone Relocation

Networking Manual
The IP Phone Relocation feature gives users access to their IP telephone
from any location by using the override login function. Users have the
flexibility of logging into their IP Station in the office as well as remotely at the
home office.
IP Phone Relocation Override
IP Phone Relocation is a feature for overriding the registration of an IP phone
from various locations. To override the registration of an IP phone, you must
have the login ID and Password of that IP phone.
Conditions
Multiple IP Phones cannot use the same user ID and the same

password at the same time.
When a user is using multiple IP Phones at the same time, the user ID

and password must be different for each phone.
When a user is using SoftPhone (CTI mode) and controlling the IP

Phone by this SoftPhone, the user ID and password should be different
for the SoftPhone and IP Phone.
An IP Phone (IP Phone and Soft phone) with DSS console cannot

override another IP Phone.
An IP Phone (IP Phone and Soft phone) with DSS console cannot be

overridden from another IP Phone.
The login ID and Password are programmed in Program 15-05-27 and

Program 84-22.
IP Phone Relocation can be used only in Manual Registration Mode.

Two ports of the same terminal type (Program 15-05-26) cannot be

assigned to the same Personal ID index (Program 15-05-27).
When using Override with an active CTI connection, Program 15-05-39

must be enabled for the extensions that will be overridden. The
overriding terminal must be of the same type and number of line keys as
the terminal to be overridden. If the types of terminals and number of
keys are different between overriding and overridden phones, the
Telephony Service Providers (1st Party and 3rd Party) may not function
properly.
Issue 6.0
9 - 69