NEC SL1100 Networking Manual page 227

NEC SL1100
Program
Program Name
Number
Network Address –
Subnet Mask
10-58-02
IP Telephone
Terminal Basic Data
15-05-16 Setup – Password
IP Telephone
Terminal Basic Data
Setup- NAT Plug &
Play
15-05-45
IP Telephone
Terminal Basic Data
Setup –
Registration Expire
Timer for NAT
15-05-47
IP Telephone
Terminal Basic Data
Setup – Subscribe
Expire Timer for
NAT
15-05-48
Networking Manual
Description/
Comments
If there are other
networks connected to
system that are not to be
routed through NAPT
translations, then these
networks must be
identified in PRG 10-58.
Use this PRG to assign
the subnet mask for the IP
Address entered in PRG
10-58-01.
Assign the authentication
password for SIP single
line telephones.
Per IP Single line
telephone, enable NAT
Plug and Play so that port
forwarding is NOT
required in the router the
IP single line telephone
resides behind. Effective
only when PRG 10-46-14
is set to 1 = Enable.
On a per station basis,
this setting defines the
SIP registration expiry
timer. If this value is set to
0, for the terminal, the
value in PRG 84-23-01 is
applied.
Note – This option is only
available in system
software 3.50 or higher.
On a per station basis,
this setting defines the
SIP subscribe expiry
timer. If this value is set to
0, for the terminal, the
value in PRG 84-23-02 is
applied.
Note – This option is only
available in system
software 3.50 or higher.
Assigned Data
Assign a valid subnet mask.
default is 0.0.0.0
Up to 24 characters
Default not assigned
0 = No (Disable)
1 = Yes (Enable)
default is 1
0 = User Timer in Program
84-23-01 60~65535(sec)
default is 180 seconds
0 = User Timer in Program
84-23-01 60~65535(sec)
default is 180 seconds
Issue 6.0
1 2 3
X
X
X
X
X
10 - 15