NEC SL1100 Networking Manual page 272

Issue 6.0
16-01-02
16-01-04
13 - 30
Program
Program Name/Description
Number
Department Group Calling
Cycle
This program is used to define
what happens when the
department group pilot number
is called.
If this is set to priority, every
new call to the pilot number will
search an idle phone in order of
the extensions priority (set in
program 16-02-02). The lower
the number the higher the
priority for that extension. For
example, if two phones are idle
and one phone has a priority of
a 1 and the other phone has a
priority of a 2, the phone with
the priority 1 will receive the
call.
If this is set to circular, every
new call to the pilot number will
cycle to an idle extension in a
circular order. The priority of
the extension is not used.
When using a department
group for Voice Mail, this
program must be set to (0)
priority.
Department Group Hunting
Mode
This program sets what
happens when an unanswered
call to a department group pilot
number reaches the last
member of the group.
If this is set to (0), once the last
extension is called the hunting
will stop.
If this is set to (1), once the last
extension is called the hunting
will continue to look for an idle
member to receive the call.
NEC recommends setting this
to (1) Circular when using a
department group for Voice
Mail.
Assigned Data
0 = Normal Routing
(Priority)
1 = Easy UCD routing
(Circular)
(default =0)
0 = Last extension is called and hunting stops
1 = Circular
(Hunting will continue)
(default =0)
NEC SL1100
SL Net