Sl1100 Requirements - NEC SL1100 Networking Manual

NEC SL1100
14.2
14.3
Networking Manual

SL1100 Requirements

The following information provides requirements for NAPT.
14.2.1 Main Software
NAPT is supported with the V1200/V1.2 or higher release of the
SL1100.
14.2.2 Hardware
The SL1100 requires the following hardware:
CPU (V1200/V1.2 or higher)

VoIP Daughter Board

14.2.3 Capacity
A maximum of 64 IP phones can be connected.
Installation
The following settings have been added for NAT traversal in the DR700 IP
Terminal.
To enter IP phone programming at the terminal, press HOLD,

TRANSFER,

(NEC).
14.3.1 Settings for terminals
Setting location: 0. Config/ 2. SIP Settings/ 8. NAT Traversal
Number
Setting
and Name
Value
of Setting
1. NAT 1. Disable
Traversal
2. Dynamic
Mode
3. Static
2.Network A character
Area Name string
3.WAN
Settings
, #. User name is ADMIN and password is 6633222
Default Factory Auto
Value Value Config
1. Disable Available Available
No value Available Available
Issue 6.0
Description
Settings for NAT Traversal:
Disable: Disables NAT Traversal
Dynamic: Performs NAT Traversal using a
dynamic conversion table.
Static: Performs NAT Traversal using a
static conversion table and requires the
WAN IP Address to be entered into the IP
Terminal.
The name of the network area to which
terminals belong. Specify up to 32
alphanumeric characters. Step is optional.
See table below.
9 - 73