NEC SL1100 Networking Manual page 116

Issue 6.0
Program/Item
No.
84-13-50 SIP Trunk CODEC
Information Basic Setup –
FAX Relay Mode
84-13-51 SIP Trunk CODEC
Information Basic Setup –
T.38 Protocol Mode
84-13-52 SIP Trunk CODEC
Information Basic Setup –
FAX Maximum Rate
SIP Trunk CODEC
84-13-56
Information Basic Setup –
Low Speed Redundancy
84-13-57 SIP Trunk CODEC
Information Basic Setup –
High Speed Data Packet
Redundancy
7 - 22
Description/
Selection
0 = Disable
1 = T.38
2 = Path Through
Default is 0

0 = RTP/UDPTL
1 = UDPTL/RTP
2 = RTP Only
3 = UDPTL Only
Default is 1

1 = 4800bps
3 = 9600bps
5 = 14400bps
Default is 5

0 ~ 2
Default is 0

0 ~ 2
Default is 0

Assigned Data
Version 5.0 or higher: Select SIP
Profile 1-2.
Version 5.0 or higher: Select SIP
Profile 1-2.
Version 5.0 or higher: Select SIP
Profile 1-2.
Version 5.0 or higher: Select SIP
Profile 1-2.
Version 5.0 or higher: Select SIP
Profile 1-2.
NEC SL1100
Comments
Set the FAX Relay Mode.
SIP Trunking