NEC SL1100 Networking Manual page 283

NEC SL1100
Paging across the network – Internal and External
A user can perform and Internal, External, or Combined page to any system in the SL
Net network. To page a remote SL Net system, follow the operation below.
Internal Page – Dial internal paging access code (701 at default) + # + two digit
system ID code (01~04) + two digit Page Zone (00~32). The following is an example
of paging internal zone 1 in remote system 1. User goes off hook and dials 701 + # +
01 + 01 and begins paging. When the user is finished paging, go back on hook to
end the page.
External Page – Dial the external paging access code (703 at default) + # + two digit
system ID code (01~04) + single digit external zone (0~3). The following is an
example of paging external zone 1 in remote system 1. User goes off hook and dials
703 + # + 01 + 1 and begins paging. When the user is finished paging, go back on
hook to end the page.
Combined Page – Dial the combined paging access code (*1 at default) + # + two
digit system ID code (00~04) + single digit external zone number (0~3).
Program
11-12-19 NA
11-12-20 NA
11-12-24 NA
31-02-01 NA
31-04-01 NA
31-07-01 NA
Networking Manual
Site A
NA
NA
NA
NA
NA
NA
Site B
Default internal page code is 701
Default external page code is 703
Default combined page code is *1
Per site assign phones to an Internal
Paging group.
By default the first 16 ports are in group
1.
Per site assign each External Paging
zone to an external paging group.
By default Zone 1 = Group 1, Zone 2 =
Group 2, and Zone 3 = Group 3.
Per site assign External Paging group
(0~3) to an Internal Paging group (0~32)
to be used for combined paging.
By default all External Groups are set to
Internal Page group 1.
Issue 6.0
Notes
13 - 41