NEC SL1100 Networking Manual page 234

Issue 6.0
Number and
1. RTP Self
Port
2. SIP Self Port
11 - 4
Number
Setting
and Name
Value
of Setting
3.WAN
Settings
Setting location: 0. Config/ 2. SIP Settings/ 8. NAT Traversal/ 3. WAN
Settings
Number and
Setting
Name of
Value
Setting
1. WAN Mate IP Address
IP Address
2. WAN SIP 1024~65535
Mate Port
3. WAN Self IP IP Address
Address
Setting location: 0. Config/ 1. Network Settings/ 6. Advanced
Settings/ 5. Self Port Settings
Name of Setting Value
Setting
1024~65528
(Even numbers
only)
1024~65535
Default Factory Auto
Value Value Config
Default Factory
Value Value
0.0.0.0 Available Available
5060 Available Available
0.0.0.0 Available Available
Default Factory
Auto Config
Value Value
3462 Available Not available
5060 Available Not available
Description
See table below.
Auto
Description
Config
WAN Address of the router that the
SL1100 resides behind. This setting
must match what is programmed in PRG
10-12-07.
Port number the SL1100 uses for SIP
registration in PRG 10-46-06.
Only used when Static NAT is enabled.
This setting is the WAN address of the
router that the NAPT Terminal resides
behind.
Description
The number of the port receiving RTP
data.
At default this is assigned to port 5060.
The First IP phone on this local LAN can
use this port. The second IP phone
would need to be changed to port 5062.
The number of the port receiving SIP
data.
At default this is assigned to port 3462.
The first IP phone on this local LAN can
use this port. The second IP phone
would need to be changed to port 3464.
NEC SL1100
NAPT