Sip Caller Id - NEC SL1100 Networking Manual

Hide thumbs Also See for SL1100:
Table of Contents

Advertisement

NEC SL1100
6.3
Program/Item
No.
14-01-24
Basic Trunk Data Setup –
Trunk-to-Trunk Outgoing
Caller ID Through Mode
21-17-01
IP Trunk (SIP) Calling Party
Number Setup for Trunk
IP Trunk (SIP) Calling Party
21-19-01
Number Setup for Extension
Networking Manual

SIP Caller ID

Description/
Selection
0 = Disable
1 = Enable
Default = 0
1 ~ 0, *, # (to equal up to 16
digits)
Default not assigned
1 ~ 0, *, # (to equal up to 16
digits)
Default not assigned
Assigned Data
Version 5.0 or higher: Select SIP
Profile 1-2.
Issue 6.0
Comments
Enable/Disable the Trunk-to-
Trunk Outgoing Caller ID
Through Mode. This option
allows Caller ID from the
original outside caller to be
displayed when a trunk is
forwarded off premise. This
option can be used only with
PRI and SIP trunks.
This program assigns the Caller
Party Number for each IP trunk.
The assigned number is sent to
the central office when the
caller places an outgoing call. If
the Calling Party Number is
assigned by both 21-17 and
21-18/21-19, the system uses
the entry in 21-18/21-19.
Assign the Calling Party
Number for each extension.
The assigned number is sent to
the central office when the
caller places an outgoing call. If
the Calling Party Number is
assigned by both Program
21-17 and 21-18/21-19, the
system uses the data in
Program 21-18/21-19.
7 - 15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents