NEC SL1100
Program/Item
No.
10-23-02
SIP System Interconnection
Setup – IP Address
10-23-04
SIP System Interconnection
Setup – Dial Number
6.8
Program/Item
No.
SIP Trunk Basic Information
84-14-06
Setup – SIP Trunk Port
Number
84-14-07
SIP Trunk Basic Information
Setup – Session Timer
Value
84-14-08
SIP Trunk Basic Information
Setup – Minimum Session
Timer Value
Networking Manual
Description/
Selection
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
Default is 0.0.0.0
Up to 12 digits (0 ~ 9)
Default not assigned
SIP Protocol
Description/
Selection
1 ~ 65535
Default is 5060 = Profile 1
0 ~ 65535 seconds
Default is 0
0 ~ 65535 seconds
Default is 1800
Assigned Data
Assigned Data
5062 = Profile 2
Version 5.0 or higher: Select SIP
Profile 1-2.
Version 5.0 or higher: Select SIP
Profile 1-2.
Version 5.0 or higher: Select SIP
Profile 1-2.
Issue 6.0
Comments
Define the IP address of
another system.
Determine another system call
control port number.
Comments
Set the SIP UA (User
Authorized) Trunk port number
(Receiving Transport for NEC
SL1100 SIP).
Set the Session Timer Value.
0 means session timer is Off
Set the Minimum Session Timer
Value.
7 - 25