Figure 6-8 Common Network With Cisco Router; Configuration Examples For Classification And Queuing - NEC SL1100 Networking Manual

NEC SL1100
Networking Manual
6.7.4

Configuration Examples for Classification and Queuing

Figure 6-8 Common Network with Cisco Router

network scenario and an example of a Cisco router configuration.
This document provides a general description of VoIP

technology, but it does not discuss individual manufacturer
solutions. This sample configuration is provided as a common
scenario. It is a good example of how QoS can be implemented
on a router.
NEC does not endorse or provide support on any third party
equipment unless it is supplied by NEC.
PC
192.168.1.50
Dallas
100Mbps
192.168.1.1
Data Switch
Telephone System
192.168.1.10
Figure 6-8 Common Network with Cisco Router
See Table 6-7 Cisco Router Configuration Example
information about the Cisco 2621 router. A description of key
commands follows.
256Kbps
Private Circuit
(Leased Line)
10.0.0.1 10.0.0.2
Cisco 2621
shows a typical
192.168.2.50
Fort Worth
100Mbps
192.168.2.1
Data Switch
Cisco 2621
Telephone System
192.168.2.10
for configuration
Issue 6.0
PC
6 - 29