ABB REO 517 Applications Manual page 37


Setting group selector (GRP)
+R L2
'HVLJQ
The GRP function block has four functional inputs, each corresponding to one of the
setting groups stored within the terminal. Activation of any of these inputs changes the
active setting group. Four functional output signals are available for configuration pur-
poses, so that continuous information on active setting group is available.
ACTIVATE GROU P 4
ACTIVATE GROU P 3
ACTIVATE GROU P 2
ACTIVATE GROU P 1
IOx-Bly1
‡ GRP--ACTG RP1
IOx-Bly2
‡ GR P--AC TGRP2
‡ IOx-Bly3 GRP--ACTG RP3
‡
IOx-Bly4 GRP--ACTG RP4
&KDSWHU 
&RPPRQ IXQFWLRQV
en01000144.vsd
27