ABB REO 517 Applications Manual page 309

Multi-function terminals for railway application
Table of Contents

Advertisement

LED indication function (HL, HLED)
Activating
signal
LED
Acknow.
)LJXUH 2SHUDWLQJ VHTXHQFH  /DWFKHG$FN)6
When an acknowledgment is performed, all indications that appear before the indica-
tion with higher priority has been reset, will be acknowledged, independent of if the low
priority indication appeared before or after acknowledgment. In figure 167 is shown the
sequence when a signal of lower priority becomes activated after acknowledgment has
been performed on a higher priority signal. The low priority signal will be shown as ac-
knowledged when the high priority signal resets.
Activating
signal GREEN
Activating
signal RED
LED
Acknow.
)LJXUH 2SHUDWLQJ VHTXHQFH  WZR FRORUV LQYROYHG
If all three signals are activated the order of priority is still maintained. Acknowledg-
ment of indications with higher priority will acknowledge also low priority indications
which are not visible according to figure 168.
R
R
&KDSWHU 
0RQLWRULQJ
en01000231.vsd
G
en01000232.vsd
299

Advertisement

Table of Contents
loading

Table of Contents