Parameters Useful For Setting And Adjustments - Toshiba Tosvert VF-S15 Instruction Manual

6.1 Parameters useful for settings and adjustments
6.1.1 Searching for changes using the history function (auh)
auh : History function
History function (auh):
Automatically searches for 5 latest parameters that are programmed with values different from the
default setting and displays them in the auh. Parameter setting can also be changed within this
group auh.
How to use the history function
Operation panel
6
Notes on operation
 If no history information is stored, this parameter is skipped and the next parameter "aua" is displayed.
 head and end are added respectively to the first and last parameters in a history of changes.
LED display
action
00
MODE
auh
acc
80
50
50 acc
****
head
(end)
Parameter
MODE
display

auh
MODE

frf
MODE

00
Operation
Displays the output frequency (operation stopped).
(When standard monitor display selection f710=0
[output frequency])
The first basic parameter "auh" (history function) is displayed.
The parameter that was set or changed last is displayed.
Press the center of the setting dial to display the set value.
Turn the setting dial to change the set value.
Press the center of the setting dial to save the changed value. The
parameter name and the programmed value will flash on and off
alternately.
Turn the dial as described above to search for and display changed
parameters to check and change the settings.
head: First historic record
end: Last historic record
Press the MODE key to return to the parameter setting mode
"auh."
After that you can press the MODE key to return to the status
monitor mode or the standard monitor mode (display of output
frequency).
F-2
E6582175