Panel jog mode (if f262 is set to 1)
Here is the sequence in which modes change each time you press the
6
Note: When the inverter is in operation (RUN lamp is blinking) or when an operation command is issued
The direction of rotation can change by using extension panel.
Using RKP007Z : Display switches to fjog and rjog by every pressing the FWD/REV key.
Using RKP002Z : Pressing the UP key changes display to fjog and pressing the DOWN key
changes display to rjog.
When fjog is displayed, the inverter will be placed in forward jog run mode as long as the
key is pressed.
When rjog is displayed, the inverter will be placed in reverse jog run mode as long as the
key is pressed.
If you press and hold down the
be displayed.
M ODE
Status monitor
mode
MODE
(RUN lamp is lighting), the inverter cannot be switched to panel jog mode.
key for 20 seconds or more, the key failure alarm "e-17" will
RUN
Standard monitor
mode
MODE
Setting monitor
mode
M ODE
Panel jog mode
F-52
E6582175
MODE
key.
RUN