Integrating Wattmeter; Parameter Registration To Easy Setting Mode - Toshiba Tosvert VF-S15 Instruction Manual

6.36 Integrating wattmeter

f748 : Integrating wattmeter retention selection
f749 : Integrating wattmeter display unit selection
 Function
At the main power off, display unit of integral output power values and whether or not retain integral output
power values are selectable.
The integrating wattmeter display can be cleared by the signal to the input terminal.
Input terminal function 74, 75 (Integrating wattmeter display clear)
Title
Integrating wattmeter retention selection
f748
Integrating wattmeter display unit selection
f749
Note 1)
Note 1) The description of the adjustment range is for the conversion of the inverter monitor display.
Refer to the RS485 Communication Function Instruction Manual E6581913, in case of using the
communication options.

6.37 Parameter registration to easy setting mode

f750 : EASY key function selection
f751 to f782 : Easy setting mode parameter 1 to 32
Up to 32 arbitrary parameters can be registered to easy setting mode.
 Refer to section 4.5 for details.
Function
F-137
Adjustment range
0: Disabled
1: Enabled
0:1=1kWh
1:1=10kWh
2:1=100kWh
3:1=1000kWh
4:1=10000kWh
E6582175
Default setting
0
Depends on
the capacity
(Refer to
6
section 11.4)