How To Set Parameters - Toshiba Tosvert VF-S15 Instruction Manual

Industrial inverter
Hide thumbs Also See for Tosvert VF-S15:
Table of Contents

Advertisement

4.2

How to set parameters

There are two types of setting monitor modes: Easy mode and Standard setting mode. The mode active when power is
turned on can be selected at  (EASY key mode selection), and the mode can be switched by the EASY key. Note,
however, that the switching method differs when only the Easy mode is selected. Refer to section 4.5 for details.
Setting dial and panel key operations are as follows:
Turning the setting dial
Used to select items and changing
setting values.
Used to select the mode and return to
MODE
the previous menu
Easy setting mode
● If the EASY key is pressed while the setting dial is being turned, values continue to be incremented or decremented
even if you release your finger from the setting dial. This feature is handy when setting large values.
Note) Of the available parameters, number value parameters (acc etc.) are reflected in actual operation when the
setting dial is turned. Note, however, that the center of the setting dial must be pressed to save values even when
the power is turned off.
Note, also, that item selection parameters (fmod etc.) are not reflected in actual operation by just turning the
setting dial. To reflect these parameters, press the center of the setting dial.
Note)
EASY
: The mode changes to the Easy setting mode when the EASY key is pressed
at the standard monitor mode and "" is displayed. In the Easy setting
mode, the EASY lamp lights.
Only the most frequently used 10 basic parameters are displayed at default
setting.
Easy setting mode
Title
cmod
fmod
acc
dec
ul
ll
Motor electronic-thermal protection level 1
thr
fm
f701
psel
D-3
Pressing the center of the setting dial
Used for executing operations and determining
setting values.
Note)
Used to switch between the Easy and Standard
setting modes.
Function
Command mode selection
Frequency setting mode selection 1
Acceleration time 1
Deceleration time 1
Upper limit frequency
Lower limit frequency
Meter adjustment gain
Current/voltage unit selection
EASY key mode selection
E6582175
4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents