6.5.3
f101 : Speed reach setting frequency
f102 : Speed reach detection band
Function
[Parameter setting]
Parameter setting of frequency and detection band
Title
f101
f102
Parameter setting of output terminal selection
Title
f131
6
Setting value 9 is reverse signal.
Note: Set f132 to assign to FLA-FLC-FLB terminals and f130 to RY-RC terminal.
If the detection band value + the set frequency is less than the designated frequency
Output of set frequency speed reach signal
When the output frequency becomes equal to the frequency set by f101f102, an ON or OFF
signal is generated.
Function
Speed reach setting frequency
Speed reach detection band
Function
Output terminal
selection 2A (OUT)
Output frequency [Hz]
+
-
Set frequency attainment signal
: OUT-NO terminals
Inversion of set frequency
attainment signal
Adjustment range
0.0-fh (Hz)
0.0-fh (Hz)
Adjustment range
0-255
8: RCHF (Set frequency attainment
(Refer to section 11.7.)
0
F-28
E6582175
Default setting
0.0
2.5
Setting
signal)
Time [s]
ON
OFF
ON
OFF