Acceleration/Deceleration Time 2 And 3 - Toshiba Tosvert VF-S15 Instruction Manual

6.27 Acceleration/deceleration time 2 and 3

6.27.1 Selecting acceleration/deceleration patterns
f502 : Acceleration/deceleration 1 pattern
f506 : S-pattern lower-limit adjustment amount
f507 : S-pattern upper-limit adjustment amount
 Function
These parameters allow you to select an acceleration/deceleration pattern that suits the intended use.
Title
Acceleration/deceleration 1 pattern
f502
S-pattern lower-limit adjustment
f506
amount
S-pattern upper-limit adjustment
f507
amount
1) Linear acceleration/deceleration
A general acceleration/
deceleration pattern.
This pattern can usually be
used.
2) S-pattern 1 acceleration/deceleration
Select this pattern to accelerate/decelerate the motor rapidly to an output frequency above 60Hz or to
minimize the shocks applied during acceleration/deceleration. Perfect for conveyance machinery.
Output frequency [Hz]
Maximum frequency
Set frequency

Function
Output frequency
Maximum frequency


0

Actual acceleration time
× %  × 

F-99
Adjustment range
0: Linear, 1: S-pattern 1, 2: S-pattern 2
0-50 (%)
0-50 (%)
[Hz]
0

Output frequency [Hz]
Maximum frequency

Set frequency
0
Time [s]
Actual deceleration time
%
 × 
E6582175
Default setting
0
10
10
Time [s]

 Time [s]
× %
%  
6