Toshiba Tosvert VF-S15 Instruction Manual page 75

4.2.1 Settings in the Easy setting mode
The inverter enters this mode by pressing the MODE key when the Easy setting mode is selected
When you are unsure of something
during operation:
You can return to the Standard monitor
mode by pressing the MODE key
several times.

MODE
Standard monitor mode

(1)

 Setting parameters in the Easy setting mode
(1) Select parameter to be changed. (Turn the setting dial.)
(2) Read the programmed parameter setting. (Press the center of the setting dial.)
(3) Change the parameter value. (Turn the setting dial.)
(4) Press this key to save the parameter value. (Press the center of the setting dial.)
● To switch to the Standard setting mode, press the EASY key in the Standard monitor mode. "std" is displayed,
and the mode is switched.
Easy setting mode (Registered parameters at default setting)
Title
cmod
fmod
acc
dec
ul
ll
thr
fm
f701
psel
(2)
MODE
(3)


D-5
Function
Command mode selection
Frequency setting mode selection 1
Acceleration time 1
Deceleration time 1
Upper limit frequency
Lower limit frequency
Motor electronic-thermal protection level 1
Meter adjustment gain
Current/voltage unit selection
EASY key mode selection

(4)
 ⇔
* Parameter title and the setting
value are displayed alternately
E6582175
4
*