Device Range That Can Be Set - Mitsubishi Electric GOT2000 Series Connection Manual

11.4 CC-Link IE Field Network Basic Master Station Setting
For the settings of the CC-Link IE Field Network Basic master station, refer to the following manual.
➠ Manual for CC-Link IE Field Network Basic master station

11.5 Device Range that Can Be Set

The device ranges of controller that can be used for GOT are as follows.
Note that the device ranges in the following tables are the maximum values that can be set in GT Designer3.
The ranges of devices that can be actually monitored differ depending on the number of occupied stations of the slave
station that is specified by the master station.
Before setting, check the number of the occupied stations that is allocated to the GOT.
When a non-existent device or a device number outside the range is set, other objects with correct device settings may not
be monitored.
■1. Setting item
Item
Device
Information
Bit device
Word device
Set the device name, device number, and bit number.
The bit number can be set only when specifying the bit of word device.
Displays the device type and setting range which are selected in [Device].
Device name
Remote input(RX)
Remote output(RY)
Remote register(Ww)
Remote register(Wr)
Word-specified bit device
11.4 CC-Link IE Field Network Basic Master Station Setting
Description
Setting range
RX0 to RX3FF
RY0 to RY3FF
Ww0 to Ww1FF
Wr0 to Wr1FF
Setting range of each bit device
Device No. representation
Hexadecimal number
Hexadecimal number
-
11 - 7
11