Device Range That Can Be Set - Mitsubishi Electric GOT2000 Series Connection Manual

7.5 MODBUS/RTU master equipment Side Settings
7.6

Device Range that Can Be Set

The device ranges of controller that can be used for GOT are as follows.
Note that the device ranges in the following tables are the maximum values that can be set in GT Designer3.
The device specifications of controllers may differ depending on the models, even though belonging to the same series.
Please make the setting according to the specifications of the controller actually used.
When a non-existent device or a device number outside the range is set, other objects with correct device settings may not
be monitored.
■1. Setting item
Item
Set the device name, device number, and bit number.
The bit number can be set only when specifying the bit of word device.
Device
File No.
Information Displays the device type and setting range which are selected in [Device].
Device name
Discretes input (1)
Coils (0)
Bit device
The bit specification of the word
device
Holding registers (4)
Input registers (3)
Word device
The word specification of the bit
device
7 - 14
7.5 MODBUS/RTU master equipment Side Settings
POINT POINT POINT
MODBUS/RTU master equipment
For details of the MODBUS/RTU master equipment, refer to the manual of MODBUS/RTU
master equipment to be used.
Set the file No.
The file No. can be set only when select 6 at [Device].
Description
Setting range
GT27, GT25
100001 to 165536 100001 to 110000
000001 to 065536 000001 to 010000
Setting range of each word device
400001 to 465536 400001 to 410000
300001 to 365536 300001 to 310000
Setting range of each bit device
Device No.
representation
GT21, GS
Decimal
-