System Configuration - Mitsubishi Electric GOT2000 Series Connection Manual

4.2

System Configuration

4.2.1 Connecting to DeviceNet master equipment
Terminating resistors
Trunk line
Branch line
GOT
(DeviceNet
slave equipment)
Communication
Controller
Type
DeviceNet
master DeviceNet
equipment
*1 The maximum distance varies depending on the transmission speed and cable size. Confirm the specifications on the DeviceNet
master equipment side.
*2 Install the communication module (ABCC-M40-DEV, Type number: AB6909-B or AB6909-C) manufactured by HMS to the GT25-
FNADP.
For the communication module installation method, refer to the following manual.
➠
*3 Up to 63 GOT modules (DeviceNet slave equipment) can be connected to one DeviceNet master equipment.
*4 Connect terminal resistors at the both ends of the trunk line.
*5 GT25-W does not support the option device.
Power supply for
communication (24 V DC)
Branch line
Connection cable
Cable model Connection Max.
diagram number distance
DeviceNet connection
500m
diagram 1)
GOT2000 Series Field Network Adapter Unit Instruction Manual
Connection cable
GOT
(DeviceNet
slave equipment)
GOT
(DeviceNet
slave equipment)
(DeviceNet slave equipment)
Terminating resistors
*4
Option device
*1
121Ω, ±1%, 1/4W
GT25-FNADP
4.2 System Configuration
Communication driver
DeviceNet
DeviceNet master
equipment
Terminating resistors
GOT
Number of
connectable
equipment
*5
model
*2
*3
4 - 3
4