Got Mobile Setting - Mitsubishi Electric GOT2000 Series Connection Manual

Graphic operation terminal
Hide thumbs Also See for GOT2000 Series:
Table of Contents

Advertisement

16.3 GOT Side Settings
16.3.1

GOT Mobile setting

Step 1.
Select [Common] → [GOT Mobile Setting] from the menu.
Step 2.
Check the [Use GOT Mobile function] of [GOT Mobile Setting] to set.
For details on the settings, refer to the following manual.
Click the [OK] button when settings are completed.
16.3.2
Setting communication interface (Controller Setting)
■1. When using the wireless LAN
For using the system configuration given in this chapter (16.2 System Configuration), the wireless LAN setting is
required. For details of the setting, refer to the following.
■2. When using the Ethernet connection cable
Ethernet communication drivers must be set on the GOT, and set the Communication settings.
(1) Ethernet communication driver setting
16 - 4
16.3 GOT Side Settings
GT Designer3 (GOT2000) Screen Design Manual
22. WIRELESS LAN CONNECTION
2.
3.
4.
Click!

Advertisement

Table of Contents
loading

Table of Contents