Got Side Settings - Mitsubishi Electric GOT2000 Series Connection Manual

15.3.2

GOT Side Settings

■1. Setting communication interface (Controller Setting)
(1) When using the Ethernet connection cable
Ethernet communication drivers must be set on the GOT, and set the communication interface setting.
Step 1.
Select [Common]
Step 2.
The Controller Setting window is displayed. Select the channel to be used from the list menu.
Step 3.
Set Manufacturer, Controller Type, I/F, and Driver according to the connected equipment to be used.
Step 4.
The detailed setting is displayed after Manufacturer, Controller Type, I/F, and Driver are set.
Make the settings according to the usage environment.
Click the [OK] button when settings are completed.
(2) When using the wireless LAN
For details of the wireless LAN setting, refer to the following.
➠
15 - 12
15.3 Ethernet Connection
2.
[Controller Setting] from the menu.
POINT POINT POINT
The settings of connecting equipment can be set and confirmed in [I/F Communication Setting].
For details, refer to the following.
➠ 1.1.3 I/F communication setting
22. WIRELESS LAN CONNECTION
3.
4.
Click!