Mitsubishi Electric GOT2000 Series Connection Manual page 157

(b) Monitor screen image
Create the following screens by GT Designer3.
Base screen 1
Step 1.
Numerical display
By setting this with the numerical display, the device value of D21 can be monitored.
The device value is incremented only while [Sample Screen 1] is displayed.
Step 2.
Switch 1
This is the screen switching switch to [Sample Screen 2].
Touching this changes the base screen to [Sample Screen 2].
Base screen 2
Step 3.
Bit lamp
The device status of D22.b0 is displayed as a lamp.
Step 4.
Switch 2
This is an alternate switch for changing the state of D22.b0.
Step 5.
Switch 3
This is the screen switching switch to [Sample Screen 1]. Touching this changes the base screen to
[Sample Screen 1].
Sample Screen 1
123
Screen 2
Sample Screen 2
Screen 1
2.7 System Configuration Examples
2
2 - 87