Got Side Settings - Mitsubishi Electric GOT2000 Series Connection Manual

5.4

GOT Side Settings

5.4.1 Setting communication interface (Controller Setting)
Set the channel of the equipment to be connected to the GOT.
Step 1.
Select [Common]
Step 2.
The Controller Setting window is displayed. Select the channel to be used from the list menu.
Step 3.
Set the following items.
• Manufacturer: MODBUS
• Controller Type: MODBUS Master
• I/F: Interface to be used
• Driver: MODBUS/RTU Master
Step 4.
The detailed setting is displayed after Manufacturer, Controller Type, I/F, and Driver are set.
Make the settings according to the usage environment.
➠
Click the [OK] button when settings are completed.
5 - 12
5.4 GOT Side Settings
2.
[Controller Setting] from the menu.
5.4.2 Communication detail settings
POINT POINT POINT
The settings of connecting equipment can be set and confirmed in [I/F Communication Setting].
For details, refer to the following.
➠
1.1.3 I/F communication setting
3.
4.
Click!