3Terminating Resistors Of Got - Mitsubishi Electric GOT2000 Series Connection Manual

1.4.3 Terminating resistors of GOT
The following shows the terminating resistor specifications on the GOT side.
When setting the terminating resistor in each connection type, refer to the following.
■1. RS-422/485 communication unit
Set the terminating resistor using the terminating resistor setting switch.
Terminating resistor
*1
• For RS422/485 communication unit
1 - 26
1.4 Connection Cables for the Respective Connection
*1
100 OHM
Disable
The default setting is "Disable".
Terminating resistor setting switch
Rear view of RS-422/485 communication unit.
Switch No.
1
ON
OFF
SW1
ON
2
ON
OFF