Communication Detail Settings - Mitsubishi Electric GOT2000 Series Connection Manual

6.3.2

Communication detail settings

Make the settings according to the usage environment.
Item
GOT Net No.
*1
GOT Station
GOT Communication Port No.
Startup Time
Timeout Time
Delay Time
32bit Storage
FunctionCode[0F]
FunctionCode[10]
Coil read times
Input relay read times
Holding registor read times
Input register read times
Coil write times
Holding register write times
*1 Each of [GOT Station] set in the communication detail setting and [Station] set in the Ethernet setting must be set to different
station numbers.
➠
6.3.4 Ethernet setting
Description
Set the network No. of the GOT.
(Default: 1)
Set the station No. of the GOT.
(Default: 1)
Set the GOT port No. for the connection with the Ethernet module.
(Default: 5020)
Specify the time period from the GOT startup until GOT starts the
communication with the PLC CPU.
(Default: 3sec)
Set the time period for a communication to time out.
(Default: 3sec)
Set the delay time for reducing the load of the network/destination PLC.
(Default: 0ms)
Select the steps to store two words (32-bit data).
(Default: LH Order)
Set whether to use the function code [0F].
(Default: Used)
Set whether to use the function code [10].
(Default: Used)
Set the read points of the coil.
(Default: 1000 points)
Set the read points of the input relay.
(Default: 1000 points)
Set the read points of the holding register.
(Default: 125 points)
Set the read points of the input register.
(Default: 125 points)
Set the write points of the coil.
(Default: 800 points)
Set the write points of the holding register.
(Default: 100 points)
Range
1 to 239
1 to 247
1024 to 5010, 5014 to 65534
(Except for 5011, 5012, 5013 and 49153
to 49170)
3 to 255sec
3 to 90sec
0 to 10000
( 10 ms)
LH Order/HL Order
Used/Unused
Used/Unused
1 to 2000 (points)
1 to 2000 (points)
1 to 125 (points)
1 to 125 (points)
1 to 800(points)
1 to 100(points)
6.3 GOT Side Settings
6
6 - 5