3.6
System Configuration Examples
The following shows a system configuration example in the case of the microcomputer connection (Ethernet).
■1. System configuration
The system configuration example illustrated below is explained in this section.
■2. Communication settings on GOT side and monitor screen settings
(1) Transmission settings
Set the transmission settings of the GOT.
The transmission settings in the microcomputer connection (Ethernet) are made at [Detail Setting] on GT Designer3.
➠
(2) Monitor screen settings
For the monitor screen settings in this system configuration example, refer to the example of the system
configuration of the microcomputer connection (serial).
➠
3 - 72
3.6 System Configuration Examples
3.5.2 Communication detail settings
2.7 System Configuration Examples
IBM-PC/AT-compatible PC
(Microsoft Visual C++ Ver.6.0)