Mitsubishi Electric GOT2000 Series Connection Manual page 352

■2. When only inputting
Operation panel
External device
Name
Operation panel
*1
*2
*3
13 - 4
13.2 System Configuration
Connection cable
Connection diagram number
Connection diagram 8)
Connection diagram 10)
The power supply of 24VDC must be applied for the external I/O unit.
When the power supply of the external I/O unit is stopped in the operation, the operation panel becomes nonfunctional.
For using the operation panel again, reset the GOT after supplying the power to the external I/O unit.
When starting, turn on the external power supply to the external I/O unit and turn on the GOT.
When turning off the external power supply, a system alarm occurs.
When a system alarm is generated, input/output cannot be performed.
In this case, turn on the main power of the GOT or reset the GOT.
(When bus connection is used, the reset switch on the GOT does not function.)
GT25-W does not support the option device.
GOT
DC power supply
*1
Connection cable
Connection diagram number
Connection diagram 7)
Connection diagram 9)
Extended function OS
External I/O /Operation panel
*2
GOT
*3
Option device
GT15-DIO
GT15-DIOR
Model