Mitsubishi Electric GOT2000 Series Connection Manual page 388

■2. Settings for the remote personal computer operation
Step 1.
Select [Common]
Step 2.
Set the interface to which the personal computer is connected for the [Connecting I/F] of [PC Remote
Operation (serial)].
Click the [OK] button when settings are completed.
■3. Settings for the video/RGB equipment
Step 1.
Select [Common]
Step 2.
Set the interface to which the video/RGB equipment is connected.
Step 3.
Check the [Use Video/RGB Input] to set the function. For details on the function setting, refer to the
following manual.
➠
Step 4.
Clicking the detail setting button displays the Communication Detail Settings dialog box for each
communication driver.Make the settings according to the usage environment.
➠
Click the [OK] button when settings are completed.
15 - 8
15.2 Serial Connection
[Peripheral Setting]
[Peripheral Setting]
GT Designer3 (GOT2000) Screen Design Manual
15.2.4 Communication detail settings
2.
Click!
[PC Remote Operation] from the menu.
2. 4.
3.
[Video/RGB Input] from the menu.
Click!