Chapter 6: IP interface configuration
This chapter covers the following tasks:
Programming the SIPI for static addressing
●
Verifying connectivity to the media server
●
Verifying that the SIPI is translated
●
Upgrading the SIPI firmware version (if necessary)
●
Enabling control of the SIPI
●
Verifying the license status
●
You must program the TN8412AP Server IP Interface (SIPI) so that the system does not enter
No License Mode.
SIPI address configuration
The SIPI circuit pack usually uses static IP addressing only. See
addressing
on page 42.
Installing and Configuring the Avaya S8400 Media Server
on page 42
on page 45
on page 46
on page 46
on page 46
on page 46
Programming the SIPI for static
February 2007
41