Printer Port Settings
Direct Print Data To
A Specific Port
Printer Port Settings
The
ers
Advanced Options
button in the
log enable you to direct print data to a specific port or a network
printer.
(Print through actions only, e.g. IBM 3270 or IBM 5250 host print-
ing.)
To direct print data to a specific port, select
specify the port required. When a serial port is selected, clicking the
Configure
button will display a dialog in which you can specify the
baud rate, parity, flow control, data bits and stop bits settings.
Auto Line Feed
Selecting
ning of the next line when a carriage return command is received.
FormFeed Terminator
Selecting
paper to the top of the form when it has finished printing.
Output Character Set
The
set used for printing. This allows non-ISO Latin-1 printers to be
used.
TeemTalk Connection Configuration
dialog is displayed by clicking the
dialog. The options in this dia-
Print Direct To Port
will cause the printer to print at the begin-
will cause the printer to advance the
option enables you to select the character
Printer Port Settings
Print-
and
95