Dlp-L47 Installing The Ac Power Module In The Ncs 2002 Shelf - Cisco NCS 2006 Hardware Installation Manual

Installing the Cisco NCS 2002 Door and Other Modules
Procedure
Step 1 Complete the necessary task as applicable:
•
•
Step 2 Complete the
Stop. You have completed this procedure.

DLP-L47 Installing the AC Power Module in the NCS 2002 Shelf

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
DLP-L47 Installing the AC Power Module in the NCS 2002 Shelf, on page 127
DLP-L48 Installing the DC Power Module in the NCS 2002 Shelf, on page 129
NTP-L35 Installing the Power and Ground to the NCS 2002 Shelf, on page
DLP-L47 Installing the AC Power Module in the NCS 2002 Shelf
This procedure installs the AC power module in the
NCS 2002 system.
#2 Phillips screwdriver
• Connect the chassis to the office ground. For
detailed instructions on how to ground the
chassis, refer to the
Grounding Guide for Cisco NCS 2000 Series
Required
Onsite
None
Cisco NCS 2000 Series Hardware Installation Guide
76.
Electrostatic Discharge and
.
127