C H A P T E; Front Door - Cisco NCS 2006 Hardware Installation Manual

Installing the Cisco NCS 2015 Door and Other
Modules
This chapter describes how to install the NCS 2015 door and other modules.
The sections are:
•
•
•
•
•
•
•
•
•
•
•
•
•

Front Door

The front door of NCS 2015 provides access to the shelf, fiber-routing tray, fan-tray assembly, and LCD
screen.
There are two types of front doors that act as protective panels—standard door and deep door. The deep door
provides additional space in front of the shelf to accommodate cables that do not fit inside the standard door.
The deep door does not have a hinge and cannot be rotated like the standard door.
The laser warning label is placed on the rear of the chassis.
Front Door, page 361
NTP-L67 Installing Fiber Tray of NCS 2015 Shelf , page 362
NTP-L50 Installing Standard Door of NCS 2015 Shelf , page 366
NTP-L61 Installing Deep Door of NCS 2015 Shelf , page 372
NTP-L51 Opening and Removing the Door of the NCS 2015 Shelf , page 381
External Connection Units, page 382
NTP-L52 Install NCS 2015 ECU Module, page 384
Power Modules, page 387
NTP-L53 Installing the Power Modules in NCS 2015 Shelf , page 388
LCD Unit, page 392
Fan-Tray Assembly , page 392
NTP-L54 Installing Fan-Tray Assembly in NCS 2015 Shelf, page 393
Air Filter , page 398
25
C H A P T E R
Cisco NCS 2000 Series Hardware Installation Guide
361