Ntp-L30 Opening And Removing The Standard Door Of The Ncs 2002 Shelf; Dlp-L45 Opening The Standard Door Of The Ncs 2002 Shelf - Cisco NCS 2006 Hardware Installation Manual

Installing the Cisco NCS 2002 Door and Other Modules
NTP-L30 Opening and Removing the Standard Door of the NCS
2002 Shelf
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Procedure
Step 1 Complete the
Step 2 Complete the
Stop. You have completed this procedure.

DLP-L45 Opening the Standard Door of the NCS 2002 Shelf

Purpose
Tools/Equipment
DLP-L45 Opening the Standard Door of the NCS 2002 Shelf, on page
DLP-L46 Removing the Standard Door of the NCS 2002 Shelf, on page

NTP-L30 Opening and Removing the Standard Door of the NCS 2002 Shelf

This procedure opens and removes the standard door
of the NCS 2002.
#2 Phillips Dynamometric screwdriver
• NTP-L29 Installing the Standard Door of the
NCS 2002 Shelf, on page
• Connect the chassis to the office ground. See
Electrostatic Discharge and Grounding Guide
for Cisco NCS 2000 Series
Required
Onsite
None
This task opens the standard door of the NCS 2002
system.
#2 Phillips Dynamometric screwdriver
Cisco NCS 2000 Series Hardware Installation Guide
108.
.
111.
113.
111