Cisco Transport Controller; External Lan Interface For Ems; Tl1 Craft Interface; Modem Interface - Cisco NCS 2006 Hardware Installation Manual

Cisco Transport Controller

• Line amplifier node
• Transponder Shelf
• Layer 2 aggregation shelf
Cisco Transport Controller
CTC, the NCS 2002 craft interface software, has these specifications:
• 10/100BaseT Ethernet
• TNC/TNCE/TSC/TSCE card access: RJ-45 LAN connector on the controller front plate

External LAN Interface for EMS

The NCS 2002 external LAN interface has these specifications:
• 10/100BaseT Ethernet located on the power module

TL1 Craft Interface

The NCS 2002 TL1 craft interface has these specifications:
• TNC/TNCE/TSC/TSCE access: EIA/TIA-232 DB-9 type connector

Modem Interface

The NCS 2002 modem interface has these specifications:
• Hardware flow control
• TNC/TNCE/TSC/TSCE: EIA/TIA-232 DB-9 type connector

Alarm Interface

The NCS 2002 does not support alarm interface.

Passive Unit Remote Inventory

The NCS 2002 provides 1 standard USB port located on the power module to retrieve the passive units
inventory data.
Cisco NCS 2000 Series Hardware Installation Guide
464
Hardware Specifications