Ncs 2015 Shelf Specifications; Bandwidth; Cisco Transport Controller; External Lan Interface For Ems - Cisco NCS 2006 Hardware Installation Manual

Hardware Specifications

NCS 2015 Shelf Specifications

This section provides specifications for shelf bandwidth; Cisco Transport Controller (CTC) specifications;
the LAN, Transaction Language One (TL1), modem, and alarm specifications; timing, power, and environmental
specifications; and NCS 2015 shelf dimensions.
The NCS 2015 shelf is compliant with the ETS 300-119-4 standard.

Bandwidth

The per slot interconnection on NCS 2015 can be 250Gbps or 500 Gbps.

Cisco Transport Controller

CTC, the NCS 2015 craft interface software, has the following specifications:
• 10/100BaseT Ethernet
• TNCS/TNCS-O card access: RJ-45 LAN connector on the controller front plate
• Shelf access: RJ-45 LAN connector and optical EMS port located on the ECU. The CT/EMS copper

External LAN Interface for EMS

The NCS 2015 external LAN interface has the following specification:
• 10/100BaseT Ethernet located on the ECU and supports:
• 100 Mbps (FX) optical port located on the ECU and supports:

TL1 Craft Interface

The NCS 2015 TL1 craft interface has the following specifications:
• Speed: 9600 bps
• TNCS/TNCS-O access: EIA/TIA-232 DB-9 type connector
• An alternative RJ-45 LAN connector on TNCS/TNCS-O or ECU
• An alternative EMS optical connector on ECU
port functions as the craft port only in the secure mode.
◦ 10/100 Mbps full duplex
◦ Auto detection
◦ 100 Mbps full duplex
◦ Auto detection
NCS 2015 Shelf Specifications
Cisco NCS 2000 Series Hardware Installation Guide
473