Related Documentation - Cisco NCS 2006 Hardware Installation Manual

Related Documentation

Title
Mounting the Cisco NCS 2015 Shelf, on page 311
Connecting Power and Ground, on page 327
Connecting and Routing the Cables, on page 347
NCS 2015 Shelf Installation Acceptance Test, on
page 359
Installing the Cisco NCS 2015 Door and Other
Modules, on page 361
Installing and Configuring the Control Card, on page
399
Multishelf Management, on page 407
Maintaining the NCS 2002, NCS 2006, and NCS
2015 Shelves, on page 441
Hardware Specifications, on page 463
Related Documentation
Use the Cisco NCS 2000 Series Hardware Installation Guide in conjunction with the following referenced
publications:
• Cisco NCS 2000 Series Control Card and Node Configuration Guide
• Cisco NCS 2000 Series Network Configuration Guide
• Cisco NCS 2000 Series Line Card Configuration Guide
• Cisco NCS 2000 Series TL1 Command Guide
• Regulatory Compliance and Safety Information for Cisco NCS 2000 Series
• Electrostatic Discharge and Grounding Guide for Cisco NCS 2000 Series
• Cisco NCS 2000 Series Troubleshooting Guide
• Cisco NCS 2000 Series Licensing Configuration Guide
For an update on End-of-Life and End-of-Sale notices, refer to
optical/ps2006/prod_eol_notices_list.html
Cisco NCS 2000 Series Hardware Installation Guide
xx
Summary
Explains how to mount the Cisco NCS 2015 shelf.
Explains how to connect the power and ground NCS
2015.
Explains how to connect the routing cables and wires
for NCS 2015.
Explains how to perform the acceptance test for the
NCS 2015 shelf installation.
Explains how to install NCS 2015 Door and other
modules
Explains how to install and configure the control card
for NCS 2002, NCS 2006, and NCS 2015.
Explains how to manage multi shelves in NCS 2015,
NCS 2006, and ONS 15454 shelves.
Explains how to maintain the NCS 2002, NCS 2006,
and NCS 2015 shelf installations
Provides hardware specifications of the NCS (ANSI
and ETSI), NCS 2002, NCS 2006, and NCS 2015
shelves.
http://www.cisco.com/en/US/products/hw/
.
Preface