Cisco Ncs 2000 Series Hardware Installation Guide - Cisco NCS 2006 Hardware Installation Manual

Mounting the Cisco NCS 2002 Brackets
Use only the fastening hardware provided with the NCS 2002 to prevent loosening, deterioration, and
Caution
electromechanical corrosion of the hardware and joined material.
When mounting the NCS 2002 in a frame with a nonconductive coating (such as paint, lacquer, or enamel)
Caution
either use the thread-forming screws provided with the NCS 2002 ship kit, or remove the coating from
the threads to ensure electrical continuity.
Procedure
Step 1 Place the mounting bracket flush against the shelf as shown in the figure below.
Step 2
Align the mounting bracket screw holes against the shelf screw holes.
Step 3 Insert the screws and tighten them to a torque value of 11.5 in-lb (1.3 N-m).
Step 4 Repeat steps 1 through 3 for the mounting bracket on the opposite side.
Figure 33: Mounting the Brackets on the NCS 2002 Shelf for ETSI Rack Configuration
Step 5 Return to your originating procedure (NTP).
DLP-L38 Mounting the Brackets on the NCS 2002 Shelf for ETSI Rack Configuration

Cisco NCS 2000 Series Hardware Installation Guide

53