Document Objectives; Audience; Document Organization - Cisco NCS 2006 Hardware Installation Manual

Document Objectives

Date
July 2016
June 2016
January 2016
September 2015
July 2015
June 2015
December 2014
November 2013
Document Objectives
This document explains installation, turn up, provisioning, and maintenance for Cisco NCS 2002 and Cisco
NCS 2006, and Cisco NCS 2015 systems. Use this document in conjunction with the appropriate publications
listed in the

Audience

To use this publication, you should be familiar with Cisco or equivalent optical transmission hardware and
cabling, telecommunications hardware and cabling, electronic circuitry and wiring practices, and preferably
have experience as a telecommunications technician

Document Organization

Title
Overview, on page 1
Cisco NCS 2000 Series Hardware Installation Guide
xviii
Related Documentation, on page xx
Notes
Updated the section, "Filler and Blank Cards" in the
chapter, "Installing and Configuring the Control
Card".
Updated the bandwidth specifications for NCS 2006
in the appendix, "Hardware Specifications".
Added content for the Cisco NCS 2015 AC chassis.
Added content about the NCS 2015 Z-bracket and
deep door.
Added content for the Cisco NCS 2015 DC chassis.
Added a note in the section "Alarm Connectors" in
the chapter "Installing the Cisco NCS 2006 Door and
Other Modules".
Added content for the NCS2006-DC40 power module.
This is the first release of this publication.
section.
Summary
Provides an overview of the Cisco NCS (ANSI and
ETSI), NCS 2002, NCS 2006, and NCS 2015 shelf
install.
Preface