Maintaining the NCS 2002, NCS 2006, and NCS 2015 Shelves
Procedure
Step 1
Open the front door of the shelf assembly (see
NCS 2006 Shelf , on page
Step 2
(Optional) Complete the
remove the front door. If you do not want to remove the door, proceed to Step 3.
Step 3
Push the retention feature present on the right side of the shelf assembly to the left side (see the figure below).
Figure 243: Replacing the Air Filter
Step 4
Extract the air filter from the shelf assembly (see the figure below).
Step 5
Replace the air filter with a new one if the air filter is dirty or clogged with dust.
Step 6
Insert the air filter into the shelf assembly (see the figure below).
NTP-L20 Replacing the Air Filter of the NCS 2006 Shelf Assembly
NTP-L5 Opening and Removing the Standard Door of the
252). If the shelf assembly does not have a front door, continue with Step 3.
DLP-L13 Removing the Standard Door of the NCS 2006 Shelf , on page 255
Cisco NCS 2000 Series Hardware Installation Guide
to
445