Dlp-L75 Installing Dc Power Module In Ncs 2015 Shelf - Cisco NCS 2006 Hardware Installation Manual

Installing the Cisco NCS 2015 Door and Other Modules

DLP-L75 Installing DC Power Module in NCS 2015 Shelf

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Procedure
Step 1 Remove the filler caps from the slots where you want to install the power modules.
Figure 224: Installing the DC power module
DLP-L75 Installing DC Power Module in NCS 2015 Shelf
This procedure installs the NCS4K-DC-PSU-V1
power module in the NCS 2015 shelf.
#2 Phillips Dynamometric screwdriver
none
Required
Onsite
None
Cisco NCS 2000 Series Hardware Installation Guide
391