Manually Stopping A Recording; Displaying The Recording List; Deleting A Recording; Power And Energy Mode - AEMC PowerPad 8435 User Manual

4.5.2 MANUALLY STOPPING A RECORDING

An alarm can be manually stopped by pressing the

4.5.3 DISPLAYING THE RECORDING LIST

Press the icon's yellow button to view the recording list.
Item Function
1
Recording name
2
Memory usage
3
Recording start time
4 Recording end time

4.5.4 DELETING A RECORDING

1. Press the icon's yellow button
2. Select the recording to be deleted using the ▲ or ▼ button, then press the
To leave this screen without deleting any alarm, press the

4.6 POWER AND ENERGY MODE

This screen displays power and energy measurements. Note that the fields in this screen depend on which filter is
selected:
■ For 2- and 3-wire single-phase connections and for the 2-wire two-phase connection, only the filter selection L1 is
available. The filter is therefore not displayed; but the display is the same as for L1.
■ For the 3-wire three-phase connection, only the Σ filter selection is available. The filter is therefore not displayed, but
the display is the same as for Σ.
64
Find Quality Products Online at:
icon's yellow button. The
1 2 3
Figure 4-38
GlobalTestSupply
www.
icon will reappear in the same location.
4
button to confirm deletion.
button.
Power Quality Analyzer PowerPad
.com
® III Model 8435
sales@GlobalTestSupply.com