Automatic Recording - AEMC 6240 User Manual

4.6

Automatic Recording

1. Before making measurements, press the AUTO >2s button.
2. When the button is pressed, the MEM symbol flashes and the small
display indicates the first free OBJ : TEST number (e.g. 01 : 01). The
main display indicates
3. Use the
use the
4. When finished, press the MEM button for >2s. Automatic recording is
activated (the MEM symbol flashes).
5. Press the START/STOP button to begin measuring.
At each new measurement, the test number is incremented and the
measurement is recorded.
6. Press the START/STOP button again to stop automatic recording.
20
button to switch between the OBJ and TEST option, then
button to change the number of the test or object.
+I
OBJ.
+I
HOLD
.
MEM
TEST
P MEM
OBJ.
TEST
Use the arrow buttons
to change the values
of the OBJ and TEST
When finished, press
the MEM button for >2s
µ Ω
Micro-Ohmmeter Model 6240
> 2s