Table of Contents
Advertisement
4.6.2.1 L1, L2, L3 ENERGY METERS
The Wh... screen displays the energy meters.
The values in this screen are as follows:
Item
Function
Meters of the energy consumed by the load
Meters of the energy generated by the load
Wh
Active energy
VARh
Reactive energy
Distortion energy. This value only appears when the Non-Active Values setting is set to Separated in the VAR tab of the Calculation
VADh
Methods screen. If this setting is set to Combined, the VADh value does not appear and the VARh label corresponds to the non-active
power (N). This non-active power is unsigned and has no inductive or capacitive effect.
VAh
Apparent energy consumed
Inductive reactive effect
Capacitive reactive effect
The screen also shows DC energy if a DC sensor is connected to the Model 8435.
Filters L2 and L3 display the same information for phases 2 and 3.
4.6.3 Σ FILTER
When the Σ filter is selected, the W... screen appears as shown in Figure 4-45:
Power Quality Analyzer PowerPad
Find Quality Products Online at:
®
III Model 8435
GlobalTestSupply
www.
Figure 4-44
Figure 4-45
.com
sales@GlobalTestSupply.com
69
Advertisement
Table of Contents
